HID industrial Reverse Osmosis Membranes (RO Membranes) include HF series, HR series, SW series.
Industrial Membrane 8040 Dimensions:
| Model No. | A (inch/mm) | B (inch/mm) | C (inch/mm) |
| LP26-8040 | 40/1016 | 8.0/203.2 | 1.125/28.6 |
| ULP26-8040 |
| LP26-4040 | 4.0/100.1 | 40/1016 | 0.75/19.1 |
| ULP26-4040 |
| XLP24-4040 |
Commercial Membrane Model & Performance:
| Model No. | Feed Spacer
thickness (mil) | Min. Salt
Rejection (%) | Stabilized Salt
Rejection (%) | Permeate
Flow Rate (gpd) | Test
Pressure (psi) | Test water
TDS (ppm) |
| LP26-8040 | 28 | 99 | 99.3 | 10500 | 225 | 1500 |
| ULP26-8040 | 28 | 98.5 | 99 | 11000 | 150 | 1500 |
| LP26-4040 | 28 | 99 | 99.2 | 2200 | 225 | 1500 |
| ULP26-4040 | 28 | 98.3 | 99 | 2200 | 150 | 1500 |
| XLP24-4040 | 28 | 97.5 | 98 | 2200 | 100 | 750 |
1. Permeate flow rate and salt rejection is based on testing conditions: 25℃, PH 7.5, 20% recovery.
2. Stabilized salt rejection is generally achieved within 24-48 hours of continuous use, depending upon feedwater characteristics and operating conditions.
Operating Limits:
| Model No. | Maximum
Operating
Temperature | Maximum
Operating
Pressure | Feed Water
PH Range,
continuous
operation | Maximum Feed Water Turbidity | Maximum
Feed Water SDI | Chlorine
Tolerance |
| LP26-8040 | 45℃ | 600psi | 2-11 | 1NTU | 5 | <0.1ppm |
| ULP26-8040 | 45℃ | 600psi | 2-11 | 1NTU | 5 | <0.1ppm |
| LP26-4040 | 45℃ | 600psi | 2-11 | 1NTU | 5 | <0.1ppm |
| ULP26-4040 | 45℃ | 600psi | 2-11 | 1NTU | 5 | <0.1ppm |
| XLP24-4040 | 45℃ | 600psi | 2-11 | 1NTU | 5 | <0.1ppm |
